Set of Wad Punches
19-piece set in roll-up pouch
140 901 0
- Hole diameter 2–20 mm (in increments of 1 mm)
- For stamping out or producing gaskets and seal rings from materials such as rubber, leather, felt, plastic, cork, fabric or similar components
- Multi-layer wooden boards or polyamide boards should be used as a base impact support for stamping
- Made from special tool steel, forged
- Tool shape according to DIN 7200 A
- Conical cutting head, polished and blank, slightly conical on the inside to remove stamped out material
- Cutting edge sharpened, hardened and tempered
- Black dip-coated
- Black roll-up tool pouch made of hard-wearing polyester fabric with adjustable quick-release fasteners
Technical data
| Art. No. | 140 901 0 |
|---|---|
| EAN | 4049002111785 |
| Weight | 2,204 g |
Documents
Product data sheet | PDF
Contents
| 140 002 0 | 1x Wad Punches | Hole dia. (Inch): 1/16 Inch Hole dia. (mm): 2 mm |
| 140 003 0 | 1x Wad Punches | Hole dia. (Inch): 1/8 Inch Hole dia. (mm): 3 mm |
| 140 004 0 | 1x Wad Punches | Hole dia. (Inch): 5/32 Inch Hole dia. (mm): 4 mm |
| 140 005 0 | 1x Wad Punches | Hole dia. (Inch): 3/16 Inch Hole dia. (mm): 5 mm |
| 140 006 0 | 1x Wad Punches | Hole dia. (Inch): 1/4 Inch Hole dia. (mm): 6 mm |
140 002 0
Wad Punches
140 003 0
Wad Punches
140 004 0
Wad Punches
140 005 0
Wad Punches
140 006 0
Wad Punches
140 007 0
Wad Punches
140 008 0
Wad Punches
140 009 0
Wad Punches
140 010 0
Wad Punches
140 011 0
Wad Punches
140 012 0
Wad Punches
140 013 0
Wad Punches
140 014 0
Wad Punches
140 015 0
Wad Punches
140 016 0
Wad Punches
