Art. No. 636 025-1
- Compact, maintenance-free tabletop machine in several variants
- Crimping force 25 kN
- Operating pressure 6 bar
- Air requirement 0.75 l per working stroke
- Hand or footswitch
- Adjustable leg height
- Fast, simple retooling, ideal for small to medium-size runs
Model CM 25-3 for ferrules
- Crimp unit for insulated and uninsulated 0.08 mm² to 10 mm² ferrules
- Square crimp shape with 4 profi led jaws
- Self-adjusts to the desired ferrule size
- Adjustable insertion aid for insulated ferrules
Model CM 25-3 for turned contacts
- For crimping turned male and female contacts
- Interchangeable 4-indent units, also available for MIL
- Indent settings in 0.01 mm increments, with digital setting and readout
- Go - no-go gauge for checking basic calibration
- Electronic wear monitoring with warning function
- Setting functions in mm, inch or MIL
- Compatible with numerous locators
Pneumatic Crimping Machines CM 25
- For most of the PEW 12 inserts and locators
- 360° turnable die holder
- Fine adjustment of crimp height by adjustment nut at the press ram
Model CM 25-1
- All-purpose machine
- 6 mm stroke operation without safety closure
- 14 mm stroke with automatic safety closure
Model CM 25-2
- Crimping machine specialized for the processing of shielded modular plug connectors of well-known manufacturers, such as Hirose (TM 11/TM 21), Telegärtner (MP 8), Yamaichi, Drahtex, Molex, AMP, Tyco a.s.o.
- The machine is designed in such a way that the insulation crimp, shielded crimp, strain relief crimp and the contact crimp are processed in the same crimping die.
Model CM 25-5
- Crimping machine with sliding tray
- Connector and cable are held in the open bottom section
- Wire clamps in for safe working
- Machine crimps automatically following insertion
Model CM 25-6
- Crimping machine with reduced stroke for working without safety closure
- Suitable for all crimped connectors requiring a stroke less than 6 mm
| Art. No. | Description | Capacity mm² |
Size (lxhxw) |
Weight kg |
|---|---|---|---|---|
| 636 025-1 | Crimping machine CM 25-1 without dies | 325 x 500 x 280 | 30 | |
| 636 025-3 | Crimping machine CM 25-3 without crimping unit | 0.14 – 6.0 | 325 x 500 x 280 | 30.6 |
| 636 025-5 | Crimping machine CM 25-5 with sliding tray, without dies | 325 x 500 x 280 | 30 | |
| 636 025-6 | Crimping machine CM 25-5 with < 6 mm stroke, without dies | 325 x 500 x 280 | 30 | |
| 636 0723 3 1 | CM 25-3 with 4/8 indent crimping unit 8.72, standard locator and digital readout | 0.08 – 2.5 | 325 x 500 x 280 | 30.5 |
| 636 0723 3 01 | Crimping unit 8.72 with standard locator and digital readout | 0.08 – 2.5 | 87 x 72 x 43 | 0.5 |
| 636 0733 3 1 | CM 25-3 with 4/8 indent crimping unit 8.73, standard locator and digital readout | 0.03 - 0.5 | 325 x 500 x 280 | 30.5 |
| 636 0733 3 01 | Crimping unit 8.73 with standard locator and digital readout | 0.03 - 0.5 | 87 x 72 x 43 | 0.5 |
| 636 0753 3 1 | CM 25-3 with 4/8 indent crimping unit 8.75, standard locator and digital readout | 0.14 – 6.0 | 325 x 500 x 280 | 30.6 |
| 636 0753 3 01 | Crimping unit 8.75 with standard locator and digital readout | 0.14 – 6.0 | 100 x 76 x 43 | 0.6 |
| 636 0763 3 1 | CM 25-3 with 4/8 indent crimping unit 8.76, standard locator and digital readout | 1.5 – 10.0 | 325 x 500 x 280 | 30.6 |
| 636 0763 3 01 | Crimping unit 8.76 with standard locator and digital readout | 1.5 – 10.0 | 100 x 76 x 43 | 0.6 |
| 636 084 3 | CM 25-3 with ferrule crimping unit | 0.08 - 10.0 | 325 x 500 x 280 | 30.6 |
| 636 084 3 0 | Ferrule crimping unit | 0.08 - 10.0 | 100 x 76 x 43 | 0.6 |
| 636 30850 3 | CM 25-2 with crimping dies for shielded modular plug connectors TM11 – Hirose | 325 x 500 x 280 | 30 | |
| 636 30851 3 | CM 25-2 with crimping dies for shielded modular plug connectors MP8 – Telegärtner | 325 x 500 x 280 | 30 | |
| 636 30855 3 2 | CM 25-2 with crimping dies for shielded modular plug connectors Y-Con – Yamaichi | 325 x 500 x 280 | 30 |