Four-indent crimping tool MicroCrimp
- Crimping of turned male and female contacts
- Crimp dimensions adjustable in 0.01 mm increments
- Calibration by means of enclosed go - no go gauge
- Forced locking system and synchronous drive of indenters for highly reliable crimp connections
 |
 |
| Art. No. 8750 0000 6 |
 |
 |
 |
| Crimp range 0.03 – 10.0 mm² in 4 models |
Fine adjustment knob | Reading area, force lock |
| Art. No. | Finish | Profile | Capacity | Length mm | Weight g | |
|---|---|---|---|---|---|---|
| mm² | AWG | |||||
| 8720 0000 6 | Tool chrome plated |
|
0,08 - 2,5 | 28 - 13 | 175 | 390 |
| 8730 0000 6 | 0,03 - 0,5 | 32 - 20 | 175 | 390 | ||
| 8750 0000 6 | 0,14 - 6,0 | 26 - 10 | 230 | 680 | ||
| 8760 0000 6 | 1,50 - 10,0 | 15 - 7 | 230 | 680 | ||
| 8720 0101 61 | Tool with locator in plastic case | 850 | ||||
| 8730 0101 61 | 850 | |||||
| 8750 0401 61 | 1185 | |||||
| 8760 0401 61 | 1185 | |||||
| 8720 0000 61 | Tool without locator in plastic case | 820 | ||||
| 8730 0000 61 | 820 | |||||
| 8750 0000 61 | 1110 | |||||
| 8760 0000 61 | 1110 | |||||
| 8720 0101 0 | Standard locator for MicroCrimp 8720 0000 61 and 8730 0000 61 (for Coninvers and similar contacts) |
30 | ||||
| 30 | ||||||
| 8750 0401 0 | Standard locator for MicroCrimp 8750 0000 61 and 8760 0000 61 (for Harting, HTS, Ilme and similar contacts) |
75 | ||||
| 75 | ||||||
| 8750 1701 0 | Universal locator for MicroCrimp 8750 0000 61 and 8760 0000 61 | 170 | ||||
| 8720 1801 0 | Universal locator for MicroCrimp 8720 0000 61 and 8730 0000 61 | 170 | ||||
 |
| All special crimp tools available in a convenient plastic carrying case with gauge and reference sheet. |