↑ Top of page
You are here: Home Products Cable & Connector Tools Crimping Crimping machines

Pneumatic Crimping machines CM 25

  • Maintenance-free crimping machine with 25 kN crimping force
  • Operating pressure 6 bar
  • Air requirement 0.75 l per working stroke
  • Compatible with almost all PEW 12 dies

 

CM 25-1

  • with counter, stroke from 6 to 14 mm,
    hand or footswitch
  • automatic safety closure
    (needed only for 14 mm stroke)
  • adjustable leg height
 Crimping machine CM 25-1
  Art. No. 636 025-1

 

CM 25-3
  • Interchangeable 4-indent units for turned contacts, including for MIL
  • Connnection-specific locators can be used
  • Indents acccurate to 1/100 mm
  • Go - no go gauge for checking basic calibration
  • Includes crimping machine, customer‘s choice of 4-indent crimping unit, gauge
  Art. No. 636 0723 3 1

CM 25-5

  • Crimping machine with sliding tray for most of the crimp dies and locators of the Crimp Tool System 12
  • Connector and cable are held in the open bottom section
  • Wire clamps in for safe working
  • Automatic release following insertion
  Art. No. 636 025-5

CM 25-6

  • Crimping machine with reduced stroke for working without protection
  • Crimp die accommodation rotates through 360°
  • Fine adjustment of crimp height by adjustment nut at the press ram
  Art. No. 636 025-6

 

Art. No.DescriptionCapacity
mm²		Size
(BxHxT)		Weight
kg
636 025-1 Crimping machine CM 25-1 without dies   325 x 500 x 280 30
636 025-3 Crimping machine CM 25-3 without crimping unit 0.14 – 6.0 325 x 500 x 280 30.6
636 0723 3 1 CM 25-3 with four-indent crimping unit 8.72,
standard locator and digital readout		 0.08 – 2.5 325 x 500 x 280 30.5
636 0723 3 01 Crimping unit 8.72 with standard locator
and digital readout		 0.08 – 2.5 87 x 72 x 43 0.5
636 0753 3 1 CM 25-3 with four-indent crimping unit 8.75,
standard locator and digital readout		 0.14 – 6.0 325 x 500 x 280 30.6
636 0753 3 01 Crimping unit 8.75 with standard locator
and digital readout		 0.14 – 6.0 100 x 76 x 43 0.6
636 0763 3 1 CM 25-3 with four-indent crimping unit 8.76,
standard locator and digital readoute		 1.5 – 10.0 325 x 500 x 280 30.6
636 0763 3 01 Crimping unit 8.76 with standard locator
and digital readout		 1.5 – 10.0 100 x 76 x 43 0.6
636 025-5 Crimping machine CM 25-5 with sliding tray,
without dies		   325 x 500 x 280 30
636 025-6 Crimping machine CM 25-5 with < 6 mm stroke,
without dies		   325 x 500 x 280 30